How to Download and Flash Realme 3 Pro Firmware
If you own a realme 3 pro smartphone, you may want to know how to download and flash the firmware or flash file on your device. A flash file is a package that contains the operating system and other software components of your phone. Flashing the firmware can help you fix various issues, such as bootloop, lag, bugs, or performance problems. It can also help you upgrade or downgrade your phone's software version, or unbrick your phone if it becomes unusable.
In this article, we will show you how to download and flash the firmware for realme 3 pro, a budget-friendly smartphone with impressive features. The realme 3 pro was launched in April 2019 with Android 9.0 Pie and ColorOS 6.0. It has a 6.3-inch IPS LCD display with a resolution of 1080 x 2340 pixels and a waterdrop notch. It is powered by a Qualcomm Snapdragon 710 chipset with either 4GB or 6GB of RAM and either 64GB or 128GB of internal storage. It has a dual rear camera setup with a 16MP main sensor and a 5MP depth sensor, and a 25MP selfie camera. It also has a fingerprint scanner, a microSD card slot, a headphone jack, and a 4045mAh battery with VOOC fast charging support.
realme 3 pro flash file download
How to Download the Flash File for Realme 3 Pro
There are two ways to download the flash file for realme 3 pro: from the official source or from alternative sources. The official source is the realme website, where you can find the latest firmware updates for your device. The alternative sources are third-party websites that host various firmware files for different devices. However, you should be careful when downloading from these sources, as they may contain malware or corrupted files.
Here are the steps to download and verify the flash file for realme 3 pro:
Go to , which is one of the alternative sources that provides firmware files for realme devices.
Select your device model (RMX1851) and region (India or Global) from the drop-down menus.
Click on the download link for the firmware version that you want to flash. For example, if you want to flash realme UI 2.0 based on Android 11, you can download RMX1851_11_F.06.
Wait for the download to complete. The file size is around 4GB, so it may take some time depending on your internet speed.
After downloading, check the file name and size. It should match with the information given on the website. For example, RMX1851_11_F.06_2022030210004702.zip should have a size of 4.26 GB.
You can also verify the integrity of the file by checking its MD5 or SHA1 hash. You can use online tools like to calculate the hash of your file and compare it with the one given on the website.
</ How to Flash the Firmware on Realme 3 Pro
Once you have downloaded and verified the flash file for realme 3 pro, you can proceed to flash the firmware on your device. Flashing the firmware means installing the new software on your phone's memory, replacing the old one. However, before you flash the firmware, you need to prepare some prerequisites and take some precautions.
realme 3 pro firmware download
realme 3 pro stock rom flash file
realme 3 pro rmx1851 flash file guide
how to install stock rom on realme 3 pro
realme 3 pro msm download tool
realme 3 pro edl mode flash file
realme 3 pro rmx1851ex firmware update
realme 3 pro realme ui 2.0 flash file
realme 3 pro qpst flash tool
realme 3 pro qfil flash file
realme 3 pro android 10 firmware download
realme 3 pro unbrick flash file
realme 3 pro boot loop fix flash file
realme 3 pro official firmware download
realme 3 pro qualcomm snapdragon 710 flash file
realme 3 pro repairmymobile flash file
realme 3 pro getdroidtips firmware guide
realme 3 pro realmefirmware.com download
realme 3 pro latest firmware version
realme 3 pro rmx1851_11_f.06 flash file
realme 3 pro rmx1851ex_11_c.18 flash file
realme 3 pro rmx1851ex_11_a.21 flash file
realme 3 pro rmx1851_11_a.12_190423 flash file
realme 3 pro rmx1851ex_11_a.14 flash file
how to flash firmware file on realme 3 pro (rmx1851)
how to use qfil tool for realme 3 pro flash file
how to use qpst tool for realme 3 pro flash file
how to install via recovery mode for realme 3 pro flash file
how to enter login credential for msm download tool for realme 3 pro flash file
how to verify pc memory checksum for realme 3 pro flash file
how to download and install realme usb drivers for realme 3 pro flash file
how to bypass system lock and screen lock with realme 3 pro flash file
how to remove spyware or adware with realme 3 pro flash file
how to fix any bugs on your realme 3 pro with flash file
how to unroot your realme 3 pro with stock rom flash file
how to restore your warranty on your realme 3 pro with stock rom flash file
how to upgrade or downgrade your android version on your realme 3 pro with stock rom flash file
how to solve the heating issue on your realme 3 pro with stock rom flash file
how to improve the battery life on your realme 3 pro with stock rom flash file
how to increase the performance and speed on your realme 3 pro with stock rom flash file
how to fix the camera quality on your realme 3 pro with stock rom flash file
how to fix the network and signal issue on your realme 3 pro with stock rom flash file
how to fix the bluetooth and wifi issue on your realme 3 pro with stock rom flash file
how to fix the gps and location issue on your realme 3 pro with stock rom flash file
how to fix the sound and audio issue on your realme 3 pro with stock rom flash file
how to fix the touch screen and display issue on your realme 3 pro with stock rom flash file
how to fix the sim card and imei issue on your realme 3 pro with stock rom flash file
how to fix the google account and frp issue on your realme 3 pro with stock rom flash file
The Prerequisites and the Precautions
Here are some of the prerequisites and precautions that you need to follow before flashing the firmware on realme 3 pro:
Make sure that your phone's battery level is above 50% to avoid any interruption during the flashing process.
Backup your important data, such as contacts, messages, photos, videos, etc., to a safe location, such as a computer or a cloud service. Flashing the firmware will erase all your data on your phone, so you need to restore it later.
Enable USB debugging and OEM unlocking on your phone. To do this, go to Settings > About Phone > Tap on Build Number seven times to enable Developer Options. Then go back to Settings > Developer Options > Enable USB Debugging and OEM Unlocking.
Install the necessary drivers and tools on your computer. You will need the Qualcomm USB driver, the QFIL tool, or the QPST tool, depending on the method that you choose to flash the firmware. You can download them from .
Extract the flash file that you downloaded earlier to a folder on your computer. You will see a bunch of files inside, such as prog_emmc_firehose_8953_ddr.mbn, rawprogram0.xml, patch0.xml, etc.
The Methods to Flash via Recovery, QFIL Tool, or QPST Tool
There are three methods that you can use to flash the firmware on realme 3 pro: via recovery, via QFIL tool, or via QPST tool. Each method has its own advantages and disadvantages, so you can choose the one that suits you best. Here are the steps for each method:
Method 1: Flash via Recovery
This is the easiest and safest method to flash the firmware on realme 3 pro. However, it only works if your phone is not bricked and can boot into recovery mode. Here are the steps:
Copy the flash file that you downloaded earlier to the root directory of your phone's internal storage or SD card.
Turn off your phone and press and hold the Volume Down and Power buttons together until you see the realme logo.
Release the buttons and you will enter recovery mode. Use the volume buttons to navigate and the power button to select.
Select Install from storage device and then select From phone storage or From SD card depending on where you copied the flash file.
Browse and select the flash file that you copied earlier. It should have a .zip extension.
Confirm by selecting Yes and wait for the flashing process to complete.
Once done, select Reboot and enjoy your new firmware.
Method 2: Flash via QFIL Tool
This is a more advanced method to flash the firmware on realme 3 pro. It requires you to connect your phone to your computer and use a tool called QFIL (Qualcomm Flash Image Loader). This method can work even if your phone is bricked or cannot boot into recovery mode. However, it is more risky and complicated, so you need to be careful and follow the steps exactly. Here are the steps:
Turn off your phone and press and hold the Volume Up and Volume Down buttons together. Connect your phone to your computer using a USB cable.
Open the QFIL tool that you installed earlier on your computer. You can find it in the folder where you extracted the QPST tool.
Select Flat Build from the Select Build Type menu.
Click on Browse under Select Programmer and select the prog_emmc_firehose_8953_ddr.mbn file from the folder where you extracted the flash file.
Click on Load XML and select the rawprogram0.xml and patch0.xml files from the same folder.
Click on Download and wait for the flashing process to complete. It may take several minutes, so do not disconnect your phone or interrupt the process.
Once done, you will see a green message saying Download Succeed. You can disconnect your phone and turn it on normally.
Method 3: Flash via QPST Tool
This is another advanced method to flash the firmware on realme 3 pro. It requires you to connect your phone to your computer and use a tool called QPST (Qualcomm Product Support Tool). This method can also work even if your phone is bricked or cannot boot into recovery mode. However, it is also more risky and complicated, so you need to be careful and follow the steps exactly. Here are the steps:
Turn off your phone and press and hold the Volume Up and Volume Down buttons together. Connect your phone to your computer using a USB cable.
Open the QPST Configuration tool that you installed earlier on your computer. You can find it in the Start menu or in the folder where you extracted the QPST tool.
Click on Ports tab and check if your phone is detected as Qualcomm HS-USB QDLoader 9008. If not, try to reinstall the drivers or change the USB port.
Click on Start Clients > Software Download.
Select Backup tab and uncheck all the options under Device Backup Information.
Select Restore tab and click on Browse under Select .mbn file. Select the prog_emmc_firehose_8953_ddr.mbn file from the folder where you extracted the flash file.
Click on Browse under Select .xml file. Select the rawprogram0.xml file from the same folder.
Click on Start and wait for the flashing process to complete. It may take several minutes, so do not disconnect your phone or interrupt the process.
Once done, you will see a message saying Restore Succeed. You can disconnect your phone and turn it on normally.
Conclusion
In this article, we have shown you how to download and flash the firmware or flash file on realme 3 pro, a budget-friendly smartphone with impressive features. We have explained what a flash file is and why you may need it, and we have provided you with two ways to download it: from the official source or from alternative sources. We have also given you three methods to flash the firmware on your device: via recovery, via QFIL tool, or via QPST tool. We have also listed some of the prerequisites and precautions that you need to follow before flashing the firmware.
Flashing the firmware on realme 3 pro can help you fix various issues, such as bootloop, lag, bugs, or performance problems. It can also help you upgrade or downgrade your phone's software version, or unbrick your phone if it becomes unusable. However, flashing the firmware is not without risks, and you should always backup your data and follow the steps carefully. If you encounter any problems during the flashing process, you can try to restore your device using the backup or the recovery mode.
We hope that this article has been helpful and informative for you. If you have any questions or feedback, please feel free to leave a comment below. Thank you for reading and happy flashing!
FAQs
Here are some of the frequently asked questions about flashing the firmware on realme 3 pro:
What are the benefits of flashing the firmware on realme 3 pro?
Some of the benefits of flashing the firmware on realme 3 pro are:
You can fix various issues, such as bootloop, lag, bugs, or performance problems.
You can upgrade or downgrade your phone's software version to enjoy new features or improve stability.
You can unbrick your phone if it becomes unusable due to a corrupted software or a failed update.
You can customize your phone's software by installing custom ROMs, kernels, mods, etc.
What are the risks of flashing the firmware on realme 3 pro?
Some of the risks of flashing the firmware on realme 3 pro are:
You may lose all your data on your phone, such as contacts, messages, photos, videos, etc.
You may void your phone's warranty or violate its terms and conditions.
You may brick your phone if you flash a wrong or corrupted file or interrupt the process.
You may face compatibility issues or bugs with some apps or features after flashing.
How to backup your data before flashing the firmware on realme 3 pro?
There are several ways to backup your data before flashing the firmware on realme 3 pro. Some of them are:
Using a cloud service, such as Google Drive, Dropbox, OneDrive, etc., to sync and store your data online.
Using a computer, such as a laptop or a desktop, to copy and paste your data from your phone's internal storage or SD card.
Using a third-party app, such as Titanium Backup, Helium Backup, Super Backup, etc., to backup and restore your data and apps.
How to restore your device if something goes wrong during flashing?
If something goes wrong during flashing and your device becomes unresponsive or stuck in a bootloop, you can try to restore it using one of these methods:
Using recovery mode: Turn off your device and press and hold the Volume Down and Power buttons together until you see the realme logo. Release the buttons and you will enter recovery mode. Use the volume buttons to navigate and the power button to select. Select Wipe data/factory reset and confirm by selecting Yes. This will erase all your data and reset your device to factory settings.
Using QFIL tool: Follow the same steps as method 2 above (Flash via QFIL Tool) but select Upgrade instead of Download in step 6. This will flash the original firmware on your device and restore it to normal.
Using QPST tool: Follow the same steps as method 3 above (Flash via QPST Tool) but select Backup instead of Restore in step 5. This will backup your device's current firmware and restore it later if needed.
How to check for updates after flashing the firmware on realme 3 pro?
If you want to check for updates after flashing the firmware on realme 3 pro, you can do so by following these steps:
Go Go to Settings > Software Update and tap on Check for updates. You will see if there is any new update available for your device.
If there is an update, you can tap on Download and Install to download and install it on your device. Make sure that your device has enough battery and storage space before updating.
If there is no update, you can tap on Trial Version and check if there is any beta version available for your device. You can apply for the beta version if you want to test the new features and provide feedback to realme. However, be aware that the beta version may have bugs or issues that may affect your device's performance or stability.
44f88ac181
Comments